[TowerTalk] HDX-589 rotor and coax arms and why I re-subscribed after many year hiatus

Bryan Swadener bswadener at yahoo.com
Wed Feb 13 21:44:11 EST 2019


 I considered Chris' offerings but, then realized my plastic plumbing pipe solution would do the job fine, for almost zero cost, and I wouldn't have to wait for someone else. With common & inexpensive tools, non-critical metalwork is generally easy, too. 
Bryan WA7PRC
* * * * * Please Do NOT Reply Off-List * * * * *
----------------------------------------------------------------------

Date: Mon, 11 Feb 2019 13:16:57 -0800
From: Grant Saviers <grants2 at pacbell.net>
To: "Richard (Rick) Karlquist" <richard at karlquist.com>, Bryan Swadener <bswadener at yahoo.com>, towertalk at contesting.comSubject: Re: [TowerTalk] HDX-589 rotor and coax arms and why I re-subscribed after many year hiatus
I needed coax arms for my HDX-589, gave the measurements to KF7P for the 
offsets and he made two sets for my that work perfectly - the coax hangs 
straight in the rings from the top 90 degree bend hanger.  I recommend 
his stuff.

The figure 8 "flaking" of the lines is the way to go, and learned that 
handling heavy anchor rodes.

Grant KZ1W  


More information about the TowerTalk mailing list