[TowerTalk] correcting aluminum tube

[Máximo EA1DDO_HK1H]

Cut the bad section, then get a piece of boom to slide over the good section. Finally slide the other boom section into the new extension.
It can be done with outer extension, inner, or both.

It is more difficult to explain that it really is...

73, Maximo

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Kim
Sent: miércoles, 17 de julio de 2019 20:05
To: towertalk at contesting.com
Subject: [TowerTalk] correcting aluminum tube

Hi, all.  


Working on an used antenna over the weekend, I came across a boom section that was out-of-round enough such that the other boom section would not slide in to.  It is faintly discernible to the human eye.


How would one go about correcting it?


Thanks & 73,


Kim - WG8S

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk