[TowerTalk] A3S Traps

[Glenn Pritchard]

Regardless of how they showed up you still must have vent holes in the traps. I had a MA5B twenty years ago and although it had vent or moisture holes the traps still collected water.
Put the traps on a drill press and drill small 1/8 holes in the covers.
Make sure when assembled the holes face down.

Glenn, VA7UO 

Sent from my iPhone

> On Jul 17, 2019, at 9:35 PM, K9MA <k9ma at sdellington.us> wrote:
> 
> I recently bought some replacement traps for my old A3S from MFJ/Cushcraft. Unike the originals, the replacements have no vent holes. Among other problems, the original traps tended to collect moisture and take a long time to dry out, so I'm concerned that the replacements might be even worse. Does anyone have any experience with these unvented traps?
> 
> 
> 73,
> 
> Scott K9MA
> 
> -- 
> Scott  K9MA
> 
> k9ma at sdellington.us
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk