[TowerTalk] Weatherproof Remote Antenna Switch Box Plus

[terry burge]

Check out the local Habitat For Humanities outlet if you have one. Some incredible buys can be found every once in awhile. I just saw an electrical box at least as big as you say (a bit bigger even) for about $60 and sometime you can find them half off or more. Got nearly a whole foot wide roll of bare solid copper wire (guess about 400') for some where around $40. Checked the other day at Lowes and could not even find it?

Terry
KI7M

> On March 8, 2019 at 10:27 AM jrquark via TowerTalk <towertalk at contesting.com> wrote:
> 
> 
> G’day all;
> 
> After many years/decades of minimal amateur radio work, I finally have a tower with rotor and beam, dipole and vertical.  I finally installed a five position remote coax switch.  I would like to weatherproof the assembly by enclosing it in a weather tight case.  The case or enclosure could be found at the local big box store or electrical contractor’s supply store, which should measure; Width = 10”, Depth = 9” and Height = 12”.
> If you have a great suggestion for suppliers, please let me know.
> 
> Plus:  I am at a loss for the weatherproof pass-throughs for the RFC 600 & RG 8 coax.  Believe there was a distant discussion for such items.
> 
> Thank you for the suggestions.
> 
> Jim  - K7BIE - Somewhere now enjoying PureMichigan
> 
> James Forsman
> jamesforsman at me.com
> https://jrquark.smugmug.com/HamRadio
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk