[TowerTalk] Pulley for corner of Inverted L

[K9MA]

Just be sure the wire can slip off the sheave and get jammed in the gap.

Another possibility: Solder little loops of wire onto the antenna a few 
feet on either side of the pulley and tie a piece of rope between them, 
leaving a little slack so the wire can hang below the pulley. The rope 
goes through the pulley, not the wire.

73,
Scott K9MA


On 5/1/2019 07:17, N4ZR wrote:
> Thanks to everyone who responded to my query.  After digesting your 
> comments, I went online and discovered some pulleys that may be 
> appropriate to the job - <https://www.boatersland.com/scp28501.html>. 
> The sheaves are "plastic", and the low price has me a bit skeptical, 
> but I'll keep an eye on it.  You can pay literally hundreds of dollars 
> for similarly-sized marine pulleys with carbon-fiber sheaves
>

-- 
Scott  K9MA

k9ma at sdellington.us