[TowerTalk] Screws used in element construction

[jcjacobsen at q.com]

Just my $.02 on the subject. #1. I've found that using sheet metal screws 
will upset the metal enough to make disassembly a bear. 
#2. Most of the time, if you can't get a hose clamp tight enough to hold the 
inner/smaller element it is because you have to much of you favorite assembly 
anti-ox paste on the joint. I personally use a green "Scotch-brite" kitchen pad to 
apply the paste. I cleans the metal, and leaves just enough anti-ox on the metal. 
((HINT: After use, don't put the green pad back in the kitchen)) <GRIN> 

73 
K9WN Jake