[TowerTalk] RG-213 Hi Pot ?

[Steven Katz]

The mil spec rating for RG-213/U is 3700Vrms max; this is 5232Vpk.

I wouldn't use it at 7.7kVdc.

-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of Jim Thomson
Sent: Friday, May 10, 2019 9:52 AM
To: towertalk at contesting.com
Subject: [TowerTalk] RG-213 Hi Pot ?

Does anybody know how much max V is on  RG-213 ?   Like what are the results if a hi-pot tester used..
and say cranked up to the point where  just a few ma occurs .     I have an application where I need a  HV
cable, less than 10 ft, that will  easily handle 5700 /  7700  vdc.   It will be hardwired at both ends, no HV connectors. 
And with braid peeled way back from the center conductor, like  2-4 inches .  
The plan was to also wrap some red electrical tape  every few inches  along its  entire  length, to readily identify it as a HV cable.

Tnx....  JIm   VE7RF
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk