[TowerTalk] A50-6S Dimension SET

[k6nd at k6nd.com]

Great thanks,

I am working on it now.

Thanks,

Will
K6ND





-----Original Message-----
From: Steven Katz <stevek at jmr.com> 
Sent: Tuesday, May 21, 2019 2:21 PM
To: k6nd at k6nd.com; towertalk at contesting.com
Subject: RE: [TowerTalk] A50-6S Dimension SET

It's in the same manual, in TABLE 1, a few pages earlier.

SET for horizontal polarization and 50-51 MHz tuning = 17-7/8"

X under same conditions = 3-3/4"



-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of
k6nd at k6nd.com
Sent: Tuesday, May 21, 2019 11:16 AM
To: towertalk at contesting.com
Subject: [TowerTalk] A50-6S Dimension SET

I bought a used A50-6S 6 meter beam in Dayton, the antenna is complete and
is now assembled.

I have some trouble to get the antenna resonant, I think it is because I
don't have a dimension for the "Reddi-Match". The tuning strap was/is not at
the correct place.

I am looking for the "SET" dimension as stated on page 5 of the manual.

 

Thanks,

 

Will

K6ND

 

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk