[TowerTalk] M2inc 15M6DX tips

Wayne Kline w3ea at hotmail.com
Sun Nov 17 20:16:34 EST 2019


Jorge,

 IMO  if I had to lower the antenna   I would replace all the .049 wall with .058  and dampining rope .
  My  .20

Wayne W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Jorge Diez - CX6VM <cx6vm.jorge at gmail.com>
Sent: Sunday, November 17, 2019 7:06:32 PM
To: Wayne Kline <w3ea at hotmail.com>
Cc: Tower Talk <TowerTalk at contesting.com>
Subject: Re: [TowerTalk] M2inc 15M6DX tips

hello Wayne

thanks very much

Yes, DXE have it for $5, so will be the solution

Worst part, and expensive, will be to move the antenna to repair :-(

73,
Jorge

El dom., 17 nov. 2019 a las 21:03, Wayne Kline (<w3ea at hotmail.com<mailto:w3ea at hotmail.com>>) escribió:

Jorge.



   ½”  .049 wall  id this is the tip you can upgrade this to a more common  .058 wall.



   Not failure rate of the M2 antennas have installed two and assume there still in the air !



   HY-Gain antennas  especially there 15 meter antenna would RAIN the 7/16  element tips if you did not install the recommended dampaning rope

   3/16 “ pollyurathane  strand



    ½  .058 wall tubing is common and available at a number of sources



   Wayne  W3EA



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: TowerTalk <towertalk-bounces at contesting.com<mailto:towertalk-bounces at contesting.com>> on behalf of Jorge Diez - CX6VM <cx6vm.jorge at gmail.com<mailto:cx6vm.jorge at gmail.com>>
Sent: Sunday, November 17, 2019 5:15:01 PM
To: Tower Talk <TowerTalk at contesting.com<mailto:TowerTalk at contesting.com>>
Subject: [TowerTalk] M2inc 15M6DX tips

hello

third time I have my M2inc 15 mts yagi tips broken, now on driven element

2 years ago, M2inc asked me $28 for a 1/2´´ x .049 x 31´´ long tube, very
expensive, but since i also needed the 3/4 x 60´´ SOE section, i needed to
but at M2inc

Just for the tip, I think I can buy any 1/2´´ aluminium tube, right?  Since
i am not good at US dimensions, just need to be sure that this will work

thanks!

--
73,
Jorge
CX6VM/CW5W
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com<mailto:TowerTalk at contesting.com>
http://lists.contesting.com/mailman/listinfo/towertalk


--
73,
Jorge
CX6VM/CW5W


More information about the TowerTalk mailing list