[TowerTalk] Rigging to access feed point on boom 10 feet from tower

[w5wz at w5wz.com]

I have need to access a feed point on a 4" diameter boom, about 10 feet 
away from the tower.  I know I can "PVRC mount" to tilt and rotate it 
close to the tower, but this antenna is a monster - Force 12 C-51 XR, 
16-elements, 51 foot boom, weighing 250 pounds, so I'd rather not go 
that route and risk creating other problems.

Tower is 120 feet of Rohn 55G, guyed at 118, 77, and 37.  This antenna 
is at 52 feet above ground.  It can be reached by aerial lift/bucket 
truck, but not inexpensively.

The feed point is the driven element of the 40 meter section.  Between 
the tower and the 40m DE are the 15m and 20m reflectors of those 
section.

I do climb; I'd like to hear/see some ideas to SAFELY rig to go out to 
it myself.

--Scott, W5WZ