[TowerTalk] Galvenized Monopole Foundation
Steve Maki
lists at oakcom.org
Wed Aug 5 10:07:24 EDT 2020
Good idea. I might use a piece of R45.
I used to occasionally see an R25 pointy top section attached to the top
of wooden utility poles. Same idea.
-Steve K8LX
On 08/05/20 7:24 AM, Jeff DePolo wrote:
> Along the save lines as what Steve said, you could even side-mount a short
> section of 25G near the top and then be able to use an off-the-shelf rotor
> plate, thrust bearing, etc.. We did this on a large-face tower (Stainless
> G10) in order to hold a rotor and bearing for a 2 GHz steerable dish, and in
> another case on a smaller tower (48" face) for a steerable VHF yagi. A
> beefy collar suitable to hold a platform would be plenty strong enough to do
> this on a monopole, then it would just be a matter of the attachment to the
> 25G, preferably grabbing all three legs.
>
> Chain mounts are a cheap and easy way to add side-arms for VHF omnis and the
> like anywhere along the length of the pole.
>
> --- Jeff WN3A
>
>
>
More information about the TowerTalk
mailing list