[TowerTalk] MFJ-259B help needed

[wi6x.73 at gmail.com]

This video will help you. 
https://youtu.be/-TOyeaOfawg <https://youtu.be/-TOyeaOfawg>
An Evening with Martin F. Jue
MFJ's Antenna Analyzers
Using the MFJ-269 to Test Coaxial Cables, Part 1 of 2
at Ga Tech, February 25, 2010


> On Aug 13, 2020, at 8:00 AM, Dave Thompson <thompson at mindspring.com> wrote:
> 
> Gang.
> 
> I went to page 16 of the MFJ-259B analyzer and selected 5.5 distance to default mode.
> 
> This is the mode that tells you the distance to fault in feed.
> 
> I pushed the mode button to get to the correct advanced mode.
> 
> The 259B went through the following operations...
> 
> Capacity
> Inductance
> freq counter
> impedance R & X
> coax loss
> 
> and then started over so I never find the distance to fault mode in feet
> 
> This is supposed to tell me where in the coax I have a problem.  What am I missing?
> 
> 73 Dave K4JRB
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk