[TowerTalk] ground wire thoughts

[Jim Brown]

John,

I guess I still don't understand your layout, but you definitely want 
radials spoking out from the feedpoint of that inv-L, and from each 
element of the future array. Dave's advice is great if you're on good 
terms with the neighbor, and if it's compatible with his use of his land.

And thanks again to Jeff for raising his question.

73, Jim K9YC


On 12/24/2020 8:09 PM, w5jmw at towerfarm.net wrote:
> Yes Jim.No I am not loading the tower.It is in a reletive corner.Yes a 2 
> ele vertical on the other side.I was going to run radials from corner to 
> corner.then side to side and then start in between the anglesBut if 
> crossing is ok I can run under the verticals.and from the inv l(160) 
> that comes off the tower...tnx john