[TowerTalk] Coax Crimp-On Connectors

[K9MA]

On 1/5/2020 21:15, Grant Saviers wrote:
> My check for a good crimp is to try to pull the connector off with 
> force that feels right for the coax type before soldering the pin.  
> Maybe there is a spec for this.

There certainly is for other kinds of crimped connectors. Crimp tools 
for high-rel projects must be calibrated using a pull test.

73,

Scott K9MA

-- 
Scott  K9MA

k9ma at sdellington.us