[TowerTalk] 10/15 yagi design

[Dave Sublette]

On the Telrex, the swaged section is 6 inches long.  I just insert a 6 inch
piece of tubing at the average diameter of the two tubes before and after
it.

Dave, K4TO

On Sun, Jul 12, 2020 at 12:11 PM Jim Thomson <jim.thom at telus.net> wrote:

> Date: Fri, 10 Jul 2020 12:44:29 -0500
> From: Stan Stockton <wa5rtg at gmail.com>
> To: Dave Sublette <k4to at arrl.net>
> Cc: kj6y--- via TowerTalk <TowerTalk at contesting.com>
> Subject: Re: [TowerTalk] 10/15 yagi design
>
> <Dave,
>
> <If you send me your taper schedule and tell me how long you want the boom
> I
> <will send you a good design.  I've got all the tools needed including
> NEC-4
> <to do it and it will be my pleasure to help you.
>
> <Stan, K5GO
>
> ##  On a similar note,  how do you folks factor in any ele joints that use
> SWAGED tubing..in software ??   I avoid swaged tubing like the plague.
>
> Jim   VE7RF
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>