[TowerTalk] Balun for Force 12 6 Element 20 Meter

[K9MA]

On 7/21/2020 2:49 PM, jimlux wrote:
> Or 4 nuts - nut1 wire nut2 pvc nut3 wire nut4
> The preload between nut1 and nut2  and the preload between nut3 and 
> nut4 are what make the contact. Takes two wrenches to get it tight 
> enough.
>
>
Speaking of which, it's hard to find wrenches thin enough to lock two 
6-32 or 8-32 nuts together. I have one old, cheap, Craftsman set that 
works, but sooner or later I'm going to lose one of those up on the 
tower. All the small wrench sets ("Ignition Wrenches") available seem to 
be too thick. Short of grinding them down, does anyone know where to get 
thin ones in SAE sizes?

73,

Scott K9MA

-- 
Scott  K9MA

k9ma at sdellington.us