[TowerTalk] Buried HF/VHF feedlines
    Jim Brown 
    jim at audiosystemsgroup.com
       
    Sat Jul 25 14:57:37 EDT 2020
    
    
  
On 7/25/2020 11:42 AM, Robert Harmon wrote:
> Another idea is to forget about going underground and go overhead.   Suspend the cable from a catenary wire rope cable about 8 feet high.
Yes. Part of the runs from some RX antennas are done this way. In 
addition to suspending from a rope, Kellums grips are widely used by 
telecom and CATV drops. Look for the type with two parts that separate 
so that they can be clamped around the cable rather than needing to 
slide it over one end (and a connector). Also, study specs defining 
their mechanical strength -- I recently had one break on a feedline from 
a high dipole when the wind blew.
73, Jim K9YC
    
    
More information about the TowerTalk
mailing list