[TowerTalk] TIC rollers

[john at kk9a.com]

I do not believe that there is much vintage TIC support but it has  
been quite a while since I called Carl.

If I needed rollers I would just purchase gray PVC rod from  
McMaster-Carr. They have same day shipping and are almost never out of  
stock. You just have to cut the rod and drill a hole in the center.   
If you have access to a lathe it is super easy and probably more  
precise than the original rollers.

John KK9A



Tim Duffy k3lr wrote:

Hello Ty

Call or email Carl at TIC.

73
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf  
Of Tyler Stewart via TowerTalk
Sent: Tuesday, June 16, 2020 7:20 AM
To: towertalk at contesting.com
Subject: [TowerTalk] TIC rollers

The plastic rollers on one of my old 1022 rings have worn down.   
Anyone have a source for replacements?
73, Ty K3MM