[TowerTalk] Choice of Antenna Wire for Multi-Element 80 Meter Yagi on a Catenary

[Richard Smith]

 Hello TowerTalkers,
The team at PJ4K is planning to put up a 4-element wire yagi on 80 Meters with Inverted-Vee type elements. It will be supported by a rope catenary between two towers, at about 100' off the ground. In choosing the wire for the elements, there is a trade-off between strength and weight of the wire. Currently, I'm looking at Hard-Drawn copper wire as the wire choice, but I don't have experience with it. Are there any concerns about the use of HD copper wire, such as tendency for kinks, or other mechanical concerns?                          
I'm considering #14, #16, and #18 HD copper wire for the elements. I figured out the approximate weights of wire for a 4 element 80 meter yagi:                   
4 elements of  #14   copper wire weighs  about  6.2 lbs   Breaking strength is 213 lbs                 

4 elements of  #16  copper wire weighs  about  3.9 lbs   Breaking strength is 135 lbs                 

4 elements of  #18   copper wire weighs  about  2.5 lbs   Breaking strength is 85 lbs                 

I'm thinking that it's not just the dead weight of the wire to consider, but also the fact that lighter wire will require less tension to pull out the ends of the elements, to achieve about a 120 degree angle for the Inverted-Vee elements.                      
I'm interested in suggestions, especially from those who have tried similar antennas.
TNX and 73, Rich, N6KT