[TowerTalk] Bolts for Rohn 55 guy bracket

[Wayne Kline]

Bill,
According to the Rohn    Bible   Rohn -55   it uses   6 pieces  5/8 X  3 ¼ “ NC  bolts

Wayne W3EA,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Bill via TowerTalk<mailto:towertalk at contesting.com>
Sent: Wednesday, March 25, 2020 5:33 PM
To: towertalk at contesting.com<mailto:towertalk at contesting.com>
Subject: [TowerTalk] Bolts for Rohn 55 guy bracket

I recently picked up a couple of used Rohn 55 guy bracket assemblies.  However, I believe the bolts that attach to the guy wire are undersized and probably were for a Rohn 45 bracket.  They appear to be 5/8 inches and the hole will accept a 3/4 inch.  So, I know I need a 3/4 inch grade 5 galvanized, but how long should it be.  Too long and the shank will noit be able to be snugged, too short and I won't be able to put a nut on it.  I can't find the info anywhere on the Rohn site.
Help!
By the way, still looking for a third guy bracket assembly, Phillystran, a rotor plate and top plate for Rohn 55.
K4XS/V31...soon.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk