[TowerTalk] Feedthroughs for rotator cable?

[jimlux]

On 11/13/20 3:24 PM, Jim Brown wrote:
> On 11/13/2020 2:29 PM, jimlux wrote:
>> These days, I'd use those nifty green connection blocks with the screw 
>> clamps. Stick the stripped wire in, tighten the screw, done. No need 
>> for ring or spade lugs, and you can easily probe from the top.
> 
> Yes, we've used them in the world of installed audio systems since at 
> least the '90s, where they're known as Phoenix connectors. SteppIR 
> adopted them sometime in the last decade. If I'd had them in my junk box 
> at the time, I would have certainly used them. :)
> 

Phoenix is one of the main brands.