[TowerTalk] Coax for rotator loop

[Steve Jones]

Bill,
I used Davis Buryflex on my SteppIR DB42 7 years ago, no problems yet.  I
also put the part that would otherwise chafe against the sharp corners of
the tower top inside a length of flexible garden hose.  That might be a
problem if you experience hard freezes.
73,
Steve
N6SJ


-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of Bill Parry
Sent: Thursday, November 19, 2020 8:30 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Coax for rotator loop

I am in the process of replacing my yagi and I am looking for the best coax
for the loop around the rotator. It seems to me that a recommended type of
coax as the Davis Buryflex coax. Is this a good recommended type of coax or
is there something better?  The total length of the loop is going to be
about 25 feet.  Any recommendation would be appreciated. 

Bill W5VX

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk