[TowerTalk] Coax for rotator loop

[turnbull]

Bill, For what it is worth my service loop uses RG213.    The coax and Steppir control lines are then wrapped with Spira wrap and 3M 88 electrical tape.    Any place there may be chaffing has an additional protective layer for two layers total.73 Doug EI2CNSent from my Samsung Galaxy smartphone.
-------- Original message --------From: Bill Parry <bparry at rgv.rr.com> Date: 20/11/2020  04:31  (GMT+00:00) To: towertalk at contesting.com Subject: [TowerTalk] Coax for rotator loop I am in the process of replacing my yagi and I am looking for the best coax for the loop around the rotator. It seems to me that a recommended type of coax as the Davis Buryflex coax. Is this a good recommended type of coax or is there something better?  The total length of the loop is going to be about 25 feet.  Any recommendation would be appreciated. Bill W5VX______________________________________________________________________________________________TowerTalk mailing listTowerTalk at contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk