[TowerTalk] Need ideas for 80m Vertical Foldover Base

Richard (Rick) Karlquist richard at karlquist.com
Tue Nov 24 17:55:53 EST 2020


On 11/23/2020 3:14 PM, RVZ via TowerTalk wrote:
> Hi Guys,
> 
> Hoping you'll have some ideas on how I can home brew an "Insulated Fold over Base" for an 80-meter Vertical which will be fed at the base and needs to be insulated from ground. Related information: The bottom 32' of the Vertical will be an Aluminum tower. The top 35' of the Vertical will be telescoping aluminum tubing, the c

FWIW, it is fairly easy to make a guyed 80 meter vertical
out of 3 inch aluminum irrigation pipe, which doesn't
cost much.  OTOH, aluminum lattice towers are quite
expensive, even used.  I would never waste my aluminum
tower sections on a guyed vertical.

There are innumerable simple schemes to make an insulated pivot
for use at the bottom of the pipe vertical to insulate it
from ground.

YMMV

73 Rick


More information about the TowerTalk mailing list