[TowerTalk] 160 RECEIVE ANTENNAS

[Ignacy Misztal]

For small space:

Coax or magnetic loop - quiet but does not hear DX well
K9AY - quiet with some but not great directivity
DxEngineering 4 square - good directivity but seem to require switching off
on transmit. Pricey
HiZ / K7TJR sold by DXEngineering -  3,4, and 8 element versions. Less or
more pricey. Works pretty well and doesn't have to be switched off on
transmit.

Ignacy NO9E

On Tue, Apr 13, 2021 at 12:39 PM john nistico <electric911inc at hotmail.com>
wrote:

> I use a coax loop and a pre amp myself
>
> Get Outlook for iOS<https://aka.ms/o0ukef>
> ________________________________
> From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Dale M.
> Schwartz <dale at immlawfirm.com>
> Sent: Tuesday, April 13, 2021 12:26:20 PM
> To: towertalk at contesting.com <towertalk at contesting.com>
> Subject: [TowerTalk] 160 RECEIVE ANTENNAS
>
> I am installing a shunt feed to my tower for 160 transmitting. Interested
> in a 160 receive system.
>     Looking at DX Engineering 4-Square system. Our lot is in the woods and
> not that large.  Any advice on this or other systems would be appreciated.
>        Dale/K4ROZ
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>