[TowerTalk] Yaesu contol box?
k1ttt.dave at gmail.com
k1ttt.dave at gmail.com
Fri Aug 6 11:54:52 EDT 2021
Well, yes, kinda, maybe in a pinch.... all the boxes use the same 5 pins for motor power and indication, so yes, they can all be used if needed to power each other... HOWEVER, the 2700 and 2800 use the 6th pin to detect when it is getting near the end of travel to invoke an auto slowdown to keep the more powerful motor and likely heavier antenna from hitting the hard stop too hard.
David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: telnet://k1ttt.net:7373
-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of k7lxc--- via TowerTalk
Sent: Friday, August 6, 2021 11:35
To: towertalk at contesting.com
Subject: [TowerTalk] Yaesu contol box?
Howdy, TowerTalkians -
Are Yaesu control boxes interchangeable? Since they all have the same wiring, I'm thinking that they can all work with other Yaesu rotators. Is this right? Tnx. Cheers,Steve K7LXC _______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list