[TowerTalk] Harbour Industries RG-400

[weaverwf at usermail.com]

Same here. Crimp shield and solder tip for in-shack jumpers. Tested out fine on impedance and Vf using a Rigexpert AA-55. Routinely run 1200W or so.

73,
Bill WE5P

Comfortably Numb

> On Mar 8, 2021, at 16:02, Wayne Kline <w3ea at hotmail.com> wrote:
> 
> I also finished my inner station jumpers with Harbour  RG400   using crimp shield and solder  Center conductor   PL250 and BNC
> 
> I have has No problems
> 
> Wayne ,W3EA
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
> 
> From: john at kk9a.com<mailto:john at kk9a.com>
> Sent: Monday, March 8, 2021 3:33 PM
> To: towertalk at contesting.com<mailto:towertalk at contesting.com>
> Subject: Re: [TowerTalk] Harbour Industries RG-400
> 
> I bought a lot of Harbour RG400 on eBay for a very reasonable price. I
> have no way to test it. It has double shielding and I have had no
> issues with the jumpers that I made.
> 
> John KK9A
> 
> 
> Jamie WW3S
> 
> Anyone have experience with this? Its on Amazon but half the price of
> other manufacturers.
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk