[TowerTalk] YCCC 9 Circle Receive Array
Roger Parsons
ve3zi at yahoo.com
Thu Sep 23 14:50:18 EDT 2021
I have recently completed building a YCCC 9 Circle array, and it seems to work quite nicely. This replaces a receive 4 square using top loaded elements - I could never get that to last as animals would break one or more of the top loading wires mistuning the array.
The instructions for the YCCC array are explicit that there must be common mode chokes between each element and the combiner unit. That is obviously a good idea, but I can't understand why they suggest putting them at the combiner unit end of the feed lines to each element, and my feeling is that they should be at the element ends. (The elements have a very poor ground, and the feed lines are significantly long. Surely that means that the high impedance of a common mode choke at the combiner will be transformed to a different and probably lower impedance at the element. The effect of that could be that the feed line becomes the main and unpredictable ground for the element, and different for each element, which I think is exactly what is not required.)
Comments would be appreciated.
73 Roger
VE3ZI
More information about the TowerTalk
mailing list