[TowerTalk] Steppir

[W1JCW John]

Jim - 

I'm unclear as to what you're asking about or stating. 

Please clarify

73-
W1JCW
John

Join my new SteppIR Antennas IO group by sending an email to: 

SteppIREngineeringandRepair+subscribe at groups.io


-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of Jim Brown
Sent: Monday, August 29, 2022 2:56 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Steppir

On 8/29/2022 12:36 PM, BRUCE FORD via TowerTalk wrote:
> Anybody have an idea how I can figure this mystery out.

Sure. Manuals are on their website, including building instructions. The control cable is two pairs per element, required conductor diameter and controller drive voltage depend on length of the cable. They sell suitable cable, connectorized or not, and they sell very nice "Phoenix" 
compression-type screw-terminal connector blocks that make it easy to very neatly terminate long runs or runs that must go through walls. I have the three-element version with the added fixed director for 6M, and it's a very nice antenna.

73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk