[TowerTalk] High power 2:1 transformer was Re: 16om vertical and the number of radials
marsh at ka5m.net
marsh at ka5m.net
Fri Dec 2 16:56:54 EST 2022
I stand corrected. A vertical with radials is of course unbalanced. I'm appropriately embarrassed.
No more antenna advice from me.
Marsh KA5M
-----Original Message-----
From: Richard (Rick) Karlquist <richard at karlquist.com>
Sent: Friday, December 02, 2022 3:42 PM
To: marsh at ka5m.net; 'Pete Smith N4ZR' <pete.n4zr at gmail.com>; towertalk at contesting.com
Subject: Re: [TowerTalk] High power 2:1 transformer was Re: 16om vertical and the number of radials
Wrong device. You want an "UNUN" not a "BALUN".
A vertical antenna is unbalanced.
I have an UNUN built with RG-58 coax wound around a 2.4 inch #33 ferrite core. Very easy to make.
Rick N6RK
On 12/2/2022 1:05 PM, marsh at ka5m.net wrote:
> Yes, match at the feedpoint.
>
> You might check out Balun Designs:
> https://www.balundesigns.com/1-2-balun-25-to-50-ohms-3kw-1213/
>
> Marsh, KA5M
>
>
> -----Original Message-----
> From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of Pete
> Smith N4ZR
> Sent: Friday, December 02, 2022 2:39 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] High power 2:1 transformer was Re: 16om vertical
> and the number of radials
>
> A somewhat related question - as the R component at the feedpoint of my inverted L goes down toward 25 ohms, I've begun wondering if I should do some matching at the feedpoint, rather than using my tuner in the shack, even though feedline losses at 160 are relatively low. Can someone point me toward a good way to do a 2:1 downward transformation? I already have a common mode choke at the feedpoint.
>
> 73, Pete N4ZR
> Check out the new Reverse Beacon Network web server at<https://reversebeacon.net>.
> For spots, please use your favorite
> "retail" DX cluster.
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
More information about the TowerTalk
mailing list