[TowerTalk] Reliability (or not) of SMA connectors
Lux, Jim
jim at luxfamily.com
Sun Dec 4 13:28:52 EST 2022
On 12/4/22 9:13 AM, Pete Smith N4ZR wrote:
> My first thought is/was that there might be some sort of conductive
> Loctite-equivalent that I could use. Nothing found so far.
>
> 73, Pete N4ZR
> Check out the new Reverse Beacon Network
> web server at<https://reversebeacon.net>.
> For spots, please use your favorite
> "retail" DX cluster.
>
> On 12/4/2022 12:05 PM, w6rgs wrote:
>> Hi Pete. Have you considered using a *tiny *amount of Loctite 222
>> (purple) low strength on a small section of the threads?
>> Bill W6RGS
Not on the threads, but on the nut and either the back side cable, or,
more commonly, the remaining exposed threads or the flange or chassis.
It doesn't take much to prevent vibration and/or thermal cycling from
loosening the nut. A little blob is all it takes.
More information about the TowerTalk
mailing list