[TowerTalk] One less than optimum guy wire

[Doug Christensen]

It depends on the load. The EPA (extended profile area). Personally I would
install 6 guy wires at a 35ﾟ angle from the tower. At 50',and. at 30'.

73
Doug, WB1E

On Thu, Dec 8, 2022, 3:27 PM dave arruzza via TowerTalk <
towertalk at contesting.com> wrote:

> I need to guy a Rohn 25 tower
> 60' high
> 2 sets of guys per Rohn manual
> 1 set needs to be 36' not the standard 48' out from the tower
> Comments please
> 73Dave   W1CTN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>