[TowerTalk] Long Term Connector Reliability Re: TowerTalk Digest, Vol

Drew Vonada-Smith drew at whisperingwoods.org
Mon Jul 25 12:17:35 EDT 2022


All,

Before anyone decides to engineer a full-scale change from UHF to N connectors, whether it be due to "electrical superiority", "water resistance", "reliability", or any other reason, I suggest that you poll the experiences and opinions of a few large station or multi-multi users who have worked with both.  You are likely to exit that conversation with a very different opinion.  

The devil is in the details.  Feel free to email me if interested.

73,
Drew K3PA

-----Original Message-----

Today's Topics:

   1. Long Term Connector Reliability Re: TowerTalk Digest, Vol
      235, Issue 22 (Steve Davis | Davis RF)


----------------------------------------------------------------------

Message: 1
Date: Sun, 24 Jul 2022 19:21:42 +0000
From: Steve Davis | Davis RF <sdavis at davisrf.com>
To: "towertalk at contesting.com" <towertalk at contesting.com>
Subject: [TowerTalk] Long Term Connector Reliability Re: TowerTalk
	Digest, Vol 235, Issue 22
Message-ID:
	<BL3PR08MB7299C0C2377652BCED57AE7BD2929 at BL3PR08MB7299.namprd08.prod.outlook.com>
	
Content-Type: text/plain; charset="Windows-1252"

  The key to maximum efficiency, and life, of any connector is to well insulate it from the elements.  It must resist moisture ingress.   Whatever your favorite insulation, wrap over the connector,  and  on to the cable and/or  adjoining connector interface, so as to prohibit any ability for moisture to work its way into the connector.   Adhesive lined heat shrink, if UV resistant, is another good wrap to use.

Be sure that the wrap is UV resistant, if in doubt,  use UV resistant electrical tape (Scotch 33, etc) .

As a further backup, use silver plated connector body and pin, in case all else fails.

Using silicone electrical grease should not be necessary if all is sealed properly. But it won?t hurt either, as long as it is the non-conductive type.  Many think that silicone electrical grease is conductive, not the case.     Using anything else like Vaseline or other lubricating grease is a no-no.

Hope this help,  Steve Davis, K1PEK
   DavisRF.com                   DavisRopeAndCable.com


*


------------------------------

Subject: Digest Footer

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


------------------------------

End of TowerTalk Digest, Vol 235, Issue 23
******************************************


More information about the TowerTalk mailing list