[TowerTalk] FW: Hub City Gear Reducer Seal Repair Kit

[Robie Elms]

Dave,

I recently rebuilt one of these hub city gear boxes.  I used the seals
recommended by Matt and they fit properly.

Robie AJ4F

On Mon, May 2, 2022, 5:27 PM <maflukey at gmail.com> wrote:

> I found the following replacement seals fit my older Hub City box - these
> may or may not fit yours - check dimensions!
>
> TCM #06081 VM-BX (input shaft)
> TCM #20231 SM-H-BX  (output shaft)
>
> Hope this helps & good luck.
>
> 73
> Matt
> KM5VI
>
>
>
>
> -----Original Message-----
> From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of David
> Needham
> Sent: Monday, May 02, 2022 2:31 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] Hub City Gear Reducer Seal Repair Kit
>
> I have a Hub City Gear Reducer on my US Towers HDX 572MDPL crank up, tilt
> over amateur radio tower that has a shaft seal leak. The part numbers on
> the
> name plate are:
>
> 0220-6272-321
> 321 60/1 C
> 0205
> "17" within a circle
>
> If the "0205" is the manufacture date of Feb, 2005 (I bought the tower used
> in 2011), at 17 years old, I am thinking it would be smart to replace all
> the seals if one is leaking? Has anyone found a seal repair kit for this
> gearbox that could share the particulars with me? Apparently it is not a
> current model with Hub City.
>
> Thanks!
> Dave AA4VT
>
> --
> Thank you!
> David Needham, AA4VT (formerly K4AJA and K8AJA)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>