[TowerTalk] Tower base equipment enclosure

[Grant Saviers]

Not at the tower base, but I use a 42h x36w x18d office supplies 
cabinet, 2 doors for my entrance j-box.  I bought the welded up one. 3x 
3" + 3x 2" bottom and sides conduits in plus 2x 3" conduits into the 
shack out the back.  A couple of coats of latex house paint and all is 
well in Seattle rain after 8 years. Cheaper, easier to work inside, and 
much easier to punch than a Knaack.  Although some mice decided to live 
in the tower runs - bronze wool stuffing solved that :) .

Grant KZ1W

On 10/3/2022 01:21, M Gerber wrote:
> Has anyone used a Knaack jobsite storage box or similar at the base of
> their tower to house equipment?
> 
> I am familiar with Hoffman enclosures, however I might want to place a
> mini-PC/Raspberry Pi (for wireless antenna switching) or even a QRO remote
> antenna tuner along with several stack matches in the box. I also would be
> looking to bring 120VAC into the box.
> 
> It sure seems that with a set of Greenlee punches, one of these job boxes
> would work out nicely.
> 
> Tnx/73
> 
> Mark WH7W
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk