[TowerTalk] Phillystran to steel tower connection.

[John Simmons]

I literally just got done re-doing the top guys.

*NOW* you tell me!


-- 
73,
-de John "Curly" NI0K in rural Debs, MN USA
Hamshack Hotline: 6100000271
https://www.qrz.com/db/NI0K

Tim Duffy wrote on 10/11/2022 4:02 AM:
> Insulators at the tower end are very necessary if you have Yagi's close to
> the Phillystran attachment point.
>
> The problem is significant and is caused by the preforms that are used to
> terminate the Phillystran. The preforms are of significant length (metal)
> and when they are directly connected to the tower, they will interact and
> significantly reduce the performance of the Yagi. This has been proven in
> field and computer modeled studies.
>
> All guy wires at K3LR are Phillystran and all have insulators with bent pin
> shackles at the tower connection point. This solves the problem.
>
> https://www.dxengineering.com/parts/dxe-ins-p1
>
> 73
> Tim K3LR
>
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of John
> Langdon
> Sent: Tuesday, October 11, 2022 4:48 AM
> To: 'James M. Galm, W8WTS'; towertalk at contesting.com
> Subject: Re: [TowerTalk] Phillystran to steel tower connection.
>
> Jim,
>
> See the photo at
> https://drive.google.com/file/d/1eu8pSe_UvdPCsdKR5-trK3GlmE-G1SfV/view?usp=s
> haring
>
> The 15M beam just above this guy ring had major SWR issues before this
> insulator was installed, and this fixed it.
>
> 73 John N5CQ
>
>
> -----Original Message-----
> From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of James M.
> Galm, W8WTS
> Sent: Monday, October 10, 2022 10:11 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] Phillystran to steel tower connection.
>
> I understand from previous posts that there is value in connecting a
> Phillystran guy cable to the steel tower with an insulator.  This avoids
> grounding the 3 ft long Phillystran big grip to the tower connection point,
> which will distort the pattern of nearby yagis.  What have people done to
> connect the insulator to the tower?  It would not be sensible to use two EHS
> big grips back to back with a short piece of EHS between them (one EHS BG at
> the insulator and the other at the tower), as that would defeat the purpose
> of the insulator.  Is there a connection means between the 502 insulator and
> a thimble that is only a few inches long?
>
> 73,
>
> Jim, W8WTS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk