[TowerTalk] G2800 problem solved

[john at kk9a.com]

Yaesu rotators or prone to having water issues in the rotator connector.
The boot alone does not provide adequate sealing.  Perhaps opening it up
allowed it do dry a little or cleaned the contacts enough for it to function
again. When I had Yaesu G2800-DXA rotators I used silicone sealant over the
boot. 

GL,
John KK9A
 
WW3S wrote:

Well, kinda.....dont know why, I suspect when using PSTrotator, it tried
to turn the "wrong" way to get to a beam heading, it does that every so 
often....anyway, cranked the tower down and tilted it over, disconnected 
the control lead to the rotor, and metered it out, all good, put it back 
together, and it worked......gave me a chance to do a little 
maintenance, and to try a different 6m mod for my 3L Steppir.....all 
good, enjoy the holiday and remember the fallen and their families.

73'