[TowerTalk] Ground Mast Mounting

[Jay WS7I]

Far easier to use a post hole digger and install a 8 foot treated 4x4 a 
couple of feet into the ground and then use strap to secure the mast.  
Or just leave a couple of feet out of the ground and put the mast over 
the pipe.

On 10/4/2023 1:32 PM, Kurt Cathcart, KR2C wrote:
> I have a bunch of military mast that I'm considering using in a semi 
> permanent basis to hold a v-uhf vertical up about 30 feet. My idea is 
> to drive a support pipe into the ground and mount the military mast to 
> that.  My question is, what do I use to mount the military mast to the 
> pipe driven into the ground? Tie-wraps, bubble gum and duct tape fall 
> short of the requirement.
>
>
> -Kurt, KR2C
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk