[TowerTalk] Butane soldering iron recommendations?

[Jim W7RY]

Weller Pyropen with very large tip.

Works super for outdoor antenna work. Even solders a PL-259 onto RG-213.

They are most likely over $200 bucks now!

73 Jim W7RY


On 9/20/2023 3:40 PM, Mike Smith VE9AA wrote:
> Hi All,
>
>   
>
> Long time since I've posted, but read most of your emails at least weekly,
> if not daily.
>
>   
>
> Trying to solder up some wires out in the field here before contest season
> and even during nice warm T-shirt weather, with any kind of a breeze my
> cheapie $40 butane soldering iron sometimes won't get hot enough to patch
> (solder) a stranded #12AWG wire back together.  What do I need?
>
>   
>
> I've soldered with a small el-cheapo butane (raw) torch (not ideal)
>
> I've soldered with a small butane powered soldering iron.works "OK" if it's
> warm outside (5 months of the year) and there is no breeze. (almost never
> here on the Ridge)
>
>   
>
> What are you guys using for your field repairs?  Something by Weller? How
> many Watt equivalent?
>
>   
>
> I don't want a $25 Amazon cheapie.  Already been down that road.  But also
> probably don't need a $500 unit for those few times a year I am too far from
> the house not to use a variety of my electric irons.
>
>   
>
> Thanks and keep on towertalkin'
>
>   
>
> Mike VE9Antenna Antenna
>
>   
>
> Keswick Ridge, NB
>
>   
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

-- 
Thanks and 73, Jim W7RY