[TowerTalk] Mosley coil forms

[W1JCW John]

The JR forms are definitely smaller, half the size. 

73-
W1JCW
John

Join my new SteppIR Antennas IO group by sending an email to: 

SteppIREngineeringandRepair+subscribe at groups.io

-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of mark at sladenfamily.com
Sent: Friday, August 2, 2024 6:38 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Mosley coil forms

Hi all,

 

I have an old Mosley TA-33-M that I picked up last year at Dayton.

 

I did some reconditioning last year before I put it up. cleaning with TSP and inspecting the coils.

 

Two or three of the coil forms had either cracked or broken, and I reassembled them with a vice and epoxy. 

That lasted through last winter, but I am thinking I should do something better while I have good weather.

 

I saw a 3D print stl online by  SA2CLC for TA33JR forms that I was considering printing in ABS, but I did not know if the coil forms were
identical, and I could not find any discussion around that.   I wonder if
anyone on the list has experience with TA33JR vs TA-33-M coil forms.

 

Thanks

Mark

W8GU

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk