[TowerTalk] WTB: Steel Ring gear for T2X Rotator

[David Hachadorian]

I was on that T2X rebuild treadmill for about45 years.  Three years ago, 
on XE2K's recommendation, I switched to an Alpha Spid RAK with Green 
Heron Controller.  Green Heron has a package deal.  I think KF7P has a 
package deal too.  Then pick up the cable from Wireman, and the short 
adapter plate from KF7P, and you're good to go for about $1.8K.

No more rebuilds, no more stuck brakes, no flaky potentiometers, no 
broken gears, no keeping a spare on hand.  Digital controller interfaces 
beautifully with N1MM Logger and other programs.  Rotor has been turning 
a KT-34XA and 40-2CD without a glitch for three years.  It survived 
Hurricane Hilary last summer.

Dave Hachadorian, K6LL
Yuma, AZ

On 8/5/2024 5:13 PM, john at kk9a.com wrote:
> MFJ stopping production in May is definitely going to make it tough for all
> of those Hy-Gain rotator owners.  My experience with multiple Hy-Gain
> rotators in the 80's was that they needed a lot of rebuilding.  If your T2X
> rotator is broke, it might be a good time to look at other options. Spending
> more for a better rotator may save money in the long run plus save on
> aggravation.
>
> John KK9A
>
>
> n5xz wrote:
> ]
> [Sending this out again to just in case someone may have missed it.]
>
> Looking to purchase a STEEL ring gear for a TailTwister Rotator. Anyone got
> one out there? It is p/n 5136101.
>
> 73,
>
> Allen R. Brier N5XZ
> 1515 Windloch Lane
> Richmond, TX 77406
> 713-705-4801
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk