[TowerTalk] Hy-Gail TailTwister plug pinout

[Jim W7RY]

Resistance readings for the rotator are in the hy-gain manual.

Start with ground, which is actually connected to the rotor housing.

Jim W7RY


On 8/30/2024 4:23 PM, n5xz at earthlink.net wrote:
> I recently purchased an unused TailTwister rotator for $20(!). I have been
> using T2X's rebuilt by Norm's (I think) where the original terminal strip
> was replaced by a plug/socket. I am 'assuming' they are wired the same but I
> don't have a pinout to confirm before I connect the old plug to the new
> socket. Does someone have a pinout I can use to compare and double check
> first? It is in a 'current' manual...I only have an old manual before the
> plug...
>
> Thanks,
>
> Allen R. Brier N5XZ
> 1515 Windloch Lane
> Richmond, TX 77406
> 713-705-4801
>
>
>

-- 
Thanks and 73, Jim W7RY