[TowerTalk] Acom 2000A Power Switch

[Dave KØEKL]

My 2000A has a power switch on the front of the amp, not on the back. It's a master switch, and if it's off the remote is powered off, too.

The only time I turn off the master switch is if I'm going to be disconnecting the 220V line plug from the wall socket.

Dave KØEKL

-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of John Webster NN1SS
Sent: Monday, February 5, 2024 10:30 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Acom 2000A Power Switch

Something that has confused me since I started using this amp two months ago is the fact that it has two power switches - one on the rear panel of the amp and one on the remote control pod. The manual says that the power is off until turned on via the on/off button on the remote pod. I assume this means that the power switch on the rear panel of the amp is meant to be left on even for long periods when the amp isn't being used. Is this in fact the case?

John
NN1SS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk