[TowerTalk] RF Industries Connectors/Adapters

[Bill Cotter]

Jim,

I have used hundreds of RFI UHF, N, and BNC crimp connectors for 
years with great success. The only failures were dumb mistakes that 
I made. The crimps are well made, tight and resistant to pull-out 
from thermal contraction of the cable. The center pin is a 
gas-tight connection and the braid is hex ring crimped over a 
knurled surface.

I bought the RFI Crimp Tool with several dies for different coax 
types. And, the coax stripper from DXE. A good investment overall.

73 Bill N4LG

At 12:53 AM 6/8/2024, Jim Brown wrote:
>I need to buy a few 2-3) coax adapters, N-female to PL-259 Male. 
>Amphenol parts seem to be close to unobtainium -- > $160 each in 
>lots of 7, delivery in 3 months. I see nothing in the surplus 
>market. Don't want junk. I see RF Industries parts listed in the 
>$5 range. Any experience with quality of their products?
>
>73, Jim K9YC