[TowerTalk] Junk Coonectors (was Re: How lossy are PL-259s at HF?)

[K4RO Kirk Pickering]

Hi Pete,

I have had good experience with the DX Engineering patented PL-259 
connectors. Unlike some other crimp connectors that I have purchased 
elsewhere, the build quality has been very consistent. The connectors 
are easy to assemble with a proper crimp tool, and I find the knurling 
on the outer shell to be superior to even the Amphenol connectors. I 
also prefer the soldered center pin over other PL-259 crimp connectors 
which do not require center pin soldering.

While I have used them primarily for indoor applications (short jumpers 
and longer amplifier-to-antenna switch connections) I have also used the 
DXE PL-259's outdoors with no problems whatsoever. Naturally, proper 
weatherproofing is always very important for any outdoor antenna 
connector. I would give them a try; I don't think that you will be 
disappointed.

(Just a satisfied customer.)

—Kirk K4RO


On 6/18/2024 2:37 PM, Pete Smith N4ZR wrote:
> Any experience with DX Engineering PL-259s?  I bought a half-dozen crimp 
> type for RG-8X, on the theory that DXE would stand behind their own name 
> brand.  They are even stamped with a DX Engineering patent notice  - 
> like what's to patent?  They feel a little lighter than WW2 surplus,but...
> 
> 73, Pete N4ZR