[TowerTalk] COAX SEAL

[Mike Ryan]

I disagree respectfully. The 'Tommy Tape" or "Rescue Tape" is fine but does
not hold up to UV. But even so, the method that Steve suggested below works
fine. A layer of tape, then the coax seal, the another layer of 88 or even
33. When in doubt also use liquid electrical tape over all. Your results may
vary depending on one's skill I suppose, but a connection like this could be
immersed in water.  -Mike

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Jim
W7RY
Sent: Saturday, March 09, 2024 3:52 PM
To: towertalk at contesting.com
Subject: [TowerTalk] COAX SEAL

NEVER NEVER EVER use this junk!

NEVER!

Its not silicone, its not self fusing... Its just plain junk!
Jim W7RY



On 3/9/2024 2:27 PM, Steve Jones wrote:
> Garry,
> Here's the stuff I use.
> https://amateurradiosupplies.com/products/coaxseal-coax-seal
> Used to pick it up at HRO.  I put a layer of Scotch #88 first, then the
Coax Seal, then another layer of #88.  If you put the seal on the connector
directly, you'll never get it off!
> 73,
> Steve
> N6SJ
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk