[TowerTalk] COAX SEAL

[n1bkb at aol.com]

 I follow Steve, N6SJ's suggestion all the time because it works!At my previous QTH I first wrapped each outdoor coax connection with whatever brand of black vinyl electrical tape I had on hand then carefully covered each connection in Coax-Seal.  22+ years later when I moved & had to disassemble the yagis on the tower and wire antennas I had strung up across the yard, every connection looked as clean and shiny as the day I put it up.  Really great stuff.Only caveat ... if you just apply Coax- Seal and don't cover the connection with tape first, the PL-259 or whatever connector you are covering, will internally be dry and electrically as good as it was when you installed it but a gooey mess to disassemble and virtually unusable without considerable cleaning effort years later.
Steve - N1BKB
    On Saturday, March 9, 2024 at 02:24:44 PM PST, Chuck Gooden <chuck.gooden at comcast.net> wrote:  
 
 Unfortunately the 3M Temflex is hard to come by here in Illinois but 
Scotch 2228 Moisture Sealing Tape is carried by Lowes and Home Depot 
here.  You have to stretch the tape as you apply it.  Its also 65 mil 
thick.  3m Temflex is only 30 mil thick

Chuck K9LC

On 3/9/2024 4:03 PM, David Hachadorian wrote:
> Did anyone mention 3M Temflex 2155 Rubber Splicing Tape?  $4 for a 22' 
> roll at Home Depot or Lowes.  Here's an application note from DX 
> Engineeering:
>
> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwj0h6rcluiEAxUhM0QIHeSABHAQFnoECBAQAw&url=https%3A%2F%2Fstatic.dxengineering.com%2Fglobal%2Fimages%2Fchartsguides%2Ft%2Ftes-2155.pdf&usg=AOvVaw1iTMucJUmuB7PZhlTVSnY_&opi=89978449 
>
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
>
>
> On 3/9/2024 2:13 PM, Mike Ryan wrote:
>> I disagree respectfully. The 'Tommy Tape" or "Rescue Tape" is fine 
>> but does
>> not hold up to UV. But even so, the method that Steve suggested below 
>> works
>> fine. A layer of tape, then the coax seal, the another layer of 88 or 
>> even
>> 33. When in doubt also use liquid electrical tape over all. Your 
>> results may
>> vary depending on one's skill I suppose, but a connection like this 
>> could be
>> immersed in water.  -Mike
>>
>> -----Original Message-----
>> From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf 
>> Of Jim
>> W7RY
>> Sent: Saturday, March 09, 2024 3:52 PM
>> To:towertalk at contesting.com
>> Subject: [TowerTalk] COAX SEAL
>>
>> NEVER NEVER EVER use this junk!
>>
>> NEVER!
>>
>> Its not silicone, its not self fusing... Its just plain junk!
>> Jim W7RY
>>
>>
>>
>> On 3/9/2024 2:27 PM, Steve Jones wrote:
>>> Garry,
>>> Here's the stuff I use.
>>> https://amateurradiosupplies.com/products/coaxseal-coax-seal
>>> Used to pick it up at HRO.  I put a layer of Scotch #88 first, then the
>> Coax Seal, then another layer of #88.  If you put the seal on the 
>> connector
>> directly, you'll never get it off!
>>> 73,
>>> Steve
>>> N6SJ
>>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk