[TowerTalk] Subject: Need info on original Force 12 C31XR

[Mike Fatchett W0MU]

You can use a smart phone and take photos of the manual and get it 
online.  There are some good apps for "scanning" via the camera.

Mike W0MU

On 12/17/2025 11:05 AM, Bill Ralston wrote:
> Jon asked:
>
>> Specifically, I need dimensions for the 10m driven element and the 15m
> second director.
>> Also the center boom outside diameter.
> Per my mid-2000's era manual dated 1998:
> - 10m driven element (element #6) = 102.5"
> - 15m second director  (element #9) = 98.25"
> - center section of the boom = 2.5" OD x 0.125" wall x 6' length
>
> I don't think the email reflector allows attachments, but I'll email you
> directly a scan of the relevant pages.  Let me know if you need more info.
>
> The entire manual is a big project to scan with my flaky scanner (HP sux),
> although I should do that since I know this manual doesn't exist online...
> I spent hours trying to find it (no luck).  I finally went through decades
> of ham papers to find the original.
>
> --Bill N7VM
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk