[TowerTalk] Innovantennas contact

[Steve Harrison]

On 11/26/2025 6:59 PM, Jorge Diez - CX6VM wrote:
> thanks John
>
> .........
> For me is much better to bring this parts from United States with a
> forwarder, just that don't know if this sizes are available in US

Not commonly as they're metric. In fact, however, although the 
instructions list the boom - to - mast clamp saddle as "2 inch", it 
turns out that is actually a British "2 inch" and is really only about 
1.945" diameter as measured with a standard, regular, 
international-measure (read: Chinese) micrometer. As a result, their "2 
inch" clamp saddle would NOT fit properly over my actual American 2 inch 
diameter mast, which measured 1.9985" diameter. I would have had to file 
or grind the stock clamp saddles to fit my American 2-inch-diameter 
mast. Instead, and since this was only a temporary installation for now, 
I had to leave off the U-bolt saddles.

You can try e-mailing DXE for help; they just might be able to, or 
expedite the delivery of replacement parts to you; they just might have 
an "in" with WiMo directly. Due to our tariffs and all the complications 
those entail, however, it might be better to work directly with WiMo in 
Germany.

Steve, K0XP