[TowerTalk] 4x4 Post to Pole Mounting Bracket

[Leeson]

Imitate or use something like this: 
https://www.dbspectra.com/products/antenna-clamp-regular-dsh3v3r/ or 
https://zcg.com.au/product/galvanised-steel-heavy-duty-parallel-extra-large-mount-clamp-boom-50-70mm-mast-115-185mm/

You can put it on the diagonal or fabricate flat plates for one side. 
These are used by the dozen on our commercial towers.

Dave, W6NL/HC8L

On 9/13/25 4:30 PM, Don Moman VE6JY wrote:
> A few minutes and  few pieces of angle iron 1.5 or 2",x ~7" x 6 pieces and
> you can build a far stronger and cheaper setup. No holes in the post. Then
> 2 u bolts in the angle iron to hold the mast.
> 
> On Sat, Sep 13, 2025 at 4:57 PM <browndog2344 at gmail.com> wrote:
> 
>> I am planning to set up a BigIR with elevated radials.  I have installed a
>> 4
>> x 4 post in concrete and will use a Delrin rod for the EHU support.  I am
>> having a difficult time finding a good 4 x 4 post to pipe (Delrin) bracket.
>> I would rather not just get long u-bolts and drill holes in the 4x4 post.
>> The following link looks to be exactly what I am looking for but is in the
>> UK.
>>
>>
>>
>>
>> https://www.aerialsandtv.com/wp-content/uploads/2019/11/Low-profile-brackets
>> -pair-of-installing-a-pole-on-a-post-655W-L10.jpg
>> <https://www.aerialsandtv.com/wp-content/uploads/2019/11/Low-profile-brackets-pair-of-installing-a-pole-on-a-post-655W-L10.jpg>
>>
>>
>>
>> Does anyone know of something similar in the US or have a better mouse trap
>> to attach a pole to a 4 x 4 post?
>>
>>
>>
>> 73
>>
>> Dale
>>
>> AF7WH